Tag Archives: Winter Pool Care

4 Easy Ways to Prevent Rodents from Damaging Your Pool Heater

One of the most common problems pool owners experience in the winter is rodent damage to their pool heaters. When the temperatures get colder, mice and other rodents look for warm places to take shelter from the elements. Unfortunately, your pool heater may look like a good home to them.

Whether the rodents are building nests, chewing wires, or using your pool heater as a bathroom, it is imperative that you keep them out to avoid damage.

Protect your pool heater with these easy steps

  1. Remove leaves and debris from the pump and pool heater to prevent moisture. Moisture leads to corrosion and can seize your pump motor come spring. The debris also makes a good hiding place for rodents so this step is essential.
  2. Plant mint around your pool heater. Mint deters rodents and will act as a natural barrier. Placing plastic snakes around your heater may also serve as a natural deterrent because mice don’t want to build their homes near predators.
  3. Pick up some Mouse Busters, an all natural anti-rodent
    inhibitor, at our retail store.
  4. Contact us about a one-time installation of a Pentair or
    Sta-Rite Heater Anti-Rodent Kit.

For more tips and tricks to prevent rodent damage, check out this helpful article from Swim University or call us anytime at (781) 383-3300.

Tracy’s Tips: Leaf Nets for Tarp Covers

Autumn Leaf Removal for Tarp Covers

Don’t let leaf removal get you down! There is a simple solution to keeping leaves off of your tarp pool cover. The tarp cover will keep the leaves out of your pool, but how do you handle the leaves that fall from the autumn trees and land on your tarp cover? A leaf net will fit atop a tarp cover once your pool is closed. The leaf net catches the leaves on your cover for you. Simply remove the netting and shake it out into your compost pile to get all of the leaves off of your tarp, and protect it from deterioration from rotting debris. Remove the cover and store it for next fall once the trees are bare.

Stop by our retail store or call us to order a leaf net for your pool!

Check back often for more of Tracy’s Tips on our blog.

Tracy Dieselman – Owner

Winter Pool Care Tips from the Professionals

Winter Pool Care Tips

During the cold, dark months of winter, taking care of your pool may be the last thing on your mind.

Even though swimming season is over, your pool still needs a little attention. The good news is that future problems can be prevented with some minimal maintenance over the winter season. Follow this guide and pool problems won’t plague your spring opening!

Avoid Winter Woes

Snow can wreak havoc on pool covers causing straps and springs to stretch. Excessive rainfall can raise water levels beyond the tile line causing hundreds of dollars of damage to decking, tile and coping materials, making your first spring cleaning costly and difficult. On the other hand, if the water level in your pool is too low during the winter months, your cover will not be able to support the weight of ice and snow accumulation and could cause expensive cover damage.

Pool Cover Guide
  • When using a mesh safety cover, we recommend keeping the water level 15-18″ below the cover. This level will rise as rainfall and snow-melt pass through the mesh.
  • When using a tarp cover, we recommend keeping the water level 1″ below the bottom of the skimmer, and thus the tile line. As long as the cover is in good condition, no water should pass through it. The level beneath the cover should remain constant during the off season. Periodically scoop debris off of the tarp cover and pump the water off to avoid letting a swamp grow on top of it. We recommend using a leaf net with any tarp cover to make leaf removal quick and easy.  Call us to order one.
  • Check your safety cover regularly over the winter and remove debris as it accumulates using a pool brush or leaf blower. This is especially important for pools located in areas with many trees. If you do not remove leaves and debris from your cover, improper water drainage may occur and will put too much water weight on the cover.
  • Once winter and freezing temperatures come to an end, we recommend keeping the water 1-2″ above the bottom of the skimmer with mesh safety covers. This will allow you to avoid having to add water at the pool opening and create a gap between the cover and the water’s surface. This gap prevents algae growth which occurs when the cover sits in the water. The cover’s straps may need to be tightened after stretching out under the weight of ice and snow.

Make Your Life Hassle Free

Sign up today for our Winter Care Service and we’ll take care of your winter pool woes! Our Winter Care Service was designed for the busy pool owner with better things to do than worry about pool maintenance.

Prefer to do it yourself? Stop by the South Shore Pool Supply Retail Store for everything you need for winter pool maintenance and talk to our friendly staff who will be happy to answer any of your questions.

winter pool care

Contact us today to learn more!
(781) 383-3300


Set yourself up for a successful spring opening with these
additional off-season pool care tips from our friends at
Swim University.

“Taking care of your pool doesn’t end when you put the cover on. It’s important to continue caring for your pool
during the off-season (fall, winter, and early spring) to ensure a successful and clean opening…” 10 Tips From The Pros >>

Our friends at Swim University have a ton of helpful resources for pool owners, but their advice and content does not necessarily represent those of South Shore Pool Supply. Instead, the information is intended to provide you with additional resources for optimal pool care. Please contact us directly for specific pool care advice.

Protecting Your Pool Deck from Winter Weather

As much as we love time in the pool, we also love time spent around it. Your pool deck is a place for your family and friends to gather, a place to host meals and entertain. We spend so much time making sure your pool is winterized, we often neglect the deck that surrounds it. Before winter hits, take these steps to properly protect and maintain your pool deck.

Step 1

Sweep your deck to remove all leaves, loose dirt and other debris. A basic broom should do the trick to remove all of the bigger debris and make step 2 easier.

Step 2

Once your decking is clear of debris, use a power washer to get a more thorough clean. Whether wood, cement, stone, brick or composite, your deck should be power washed to remove ground-in dirt and stains from everyday use.

Step 3

Remove and store your deck furniture, potted plants, grill, fire features, and anything else that may invite mold and mildew to grow. Moving these items will help avoid staining that will be hard to remove come spring.

Step 4

For a wood deck, stain and/or seal your decking to add a layer of protection from the ice and snow. Sealing your deck will also protect against moisture and sun when it is pool season again.

For concrete decking, seal the concrete in the fall and be prepared to fix potential cracks that can occur from freezing and thawing throughout the winter.

Step 5

When winter weather hits, shovel your wooden deck to remove snow from your pool decking. Avoid corrosive products like ice melt and salt that will cause damage to your decking material. By shoveling after every storm, you will help to avoid moisture and snow weight from causing issues with your deck’s integrity. Select a shovel without a metal edge to avoid scratching your deck’s surface.

Step 6

Consider a deck cover that will further protect your decking from winter woes.

Follow these steps and you will be well on your way to maintaining a beautiful entertainment space for your family and guests to enjoy year after year.

Winter Pool Closing Checklist

Massachusetts winters bring an abundance of snow and frigid temperatures. If you live in New England, or in another place where the temperature dips below 40 degrees Fahrenheit, you will need to winterize your swimming pool before the cold months.

The good news? We have put together an easy-to-follow checklist to help you close like a pro and set you up for an easy opening in the spring.

1. Perform Inspection & Repairs

☐ Is your equipment all functioning properly?
☐ Is your swimming pool structurally sound?
☐ Does your pool cover over have any rips or tears that need patching? Stop by our Retail Store for a safety cover patch if yours needs repair.
☐ Fix any issues prior to winterizing.

2. Clean it Like You Mean it

☐ Thoroughly vacuum and skim your pool to remove all debris, or run your robotic pool cleaner a few times prior to closing.
☐ Backwash or clean the pool filter to remove all dirt from the system.

3. Work on Your Water

☐ Check your water chemistry 5-7 days before closing.
☐ Test and balance your alkalinity, pH and calcium hardness.
☐ Shock your pool with chlorine a 2-3 days after balancing the water. We recommend a cold weather enzyme treatment like Natural Chemistry Pool Magic Spring and Fall.
☐ Add a winterizing algaecide right before covering your pool. Be sure you’ve waited the requisite 2-3 days after adding shock, when chlorine levels return to somewhere between 1-3 ppm.
☐ Water must be lowered for the closing. We recommend lowering the water 18-24” below the top of the pool. This allows for rain to replenish the level to at least 18” below the cover before the snow and ice accumulate.

  • Pools with tarp covers must have the water level 2-3″
    below the skimmer.
  • Be careful not to lower the water too much in vinyl pools, the liner can float and cause serious problems.
  • If your water level goes down further than 18″, your pool cover can stretch, rip or cause damage to cover springs and anchors.
  • Rain and snow will fill the pool over the winter.  Continue to monitor your pool water level, ensuring it is below the tile line but not more than 18” below the cover.
  • “Maintaining the proper water level in your pool is a key
    factor in supporting the weight of any debris (including snow and ice) that may collect on the pool cover. Water levels that fall below the recommended level may put excess stress on the cover, which might result in damage and voiding of the cover’s warranty. You can check the water levels by clearing any debris that has collected in the skimmer box. If the levels are low, be sure to add enough water to reach the
    recommended levels.” – LOOP-LOC

    • Guidelines for mesh and solid safety covers:
      • Mesh & Solid Pool Covers: 18″ below the top of the pool.

4. Protect Your Plumbing

☐ Drain all water from your plumbing lines including your pump, filter, heater, chlorinators and chemical feeders. Draining your lines completely (or blowing them out with a Shop-Vac) will ensure that your pipes won’t crack in freezing temperatures and cause major issues in the spring.
☐ “If you have an in-ground pool, you should blow out the lines from the skimmer, through the equipment and back to the pool, then plug the lines at the pool using expansion plugs. If you don’t blow the lines, add swimming pool antifreeze into the lines following manufacturer’s package directions. If you have an above-ground pool, you usually just need to disconnect the hoses to and from the pump and filter and plug the wall outlets.” – Hayward Pool Products

5. Remove the Extras

☐ Put away your ladders, toys, ropes, baskets, hoses, fittings, pumps, heaters, filters and any other equipment from your pool area. Rinse everything off, allow it to dry and consider storing it all in a waterproof container that animals cannot get into.
☐ Fully drain your robotic cleaner and remove the reusable filter bag. Neatly coil up the power cable and store your robotic pool cleaner and accessories in a warm,
dry location.
☐ Store the eyeball fittings, drain caps, plugs, and gauges in the skimmer basket so you know exactly where to find them in the spring.
☐ Store any equipment plugs in the pump basket so they don’t get lost.
☐ Keep everything clean, dry and organized to help you
prolong the life of your pool and equipment.

6. Cover Time

☐ Make sure you have an intact, properly fitting pool cover.

  • Covers that do not fit properly (you can see gaps) will leave your pool exposed to the elements.
  • Use a mesh or solid pool cover and follow the manufacturer’s guidelines to ensure proper installation.

The closing process varies for in-ground and above ground pools. For additional pool closing information, be sure to check out the links below for pool-specific tips from our friends at Swim University.

How to Close An In-Ground Pool in 6 Steps

How to Close An Above Ground Pool in 6 Steps

It is a bummer that pool season has come to an end, but when spring rolls around you will be happy to have taken the necessary steps in the fall for an easier opening in the spring.

 

Tracy’s Tips: When does hiring a pool maintenance company make sense?

As a pool owner, you know that a considerate amount of work comes before, during and after the fun pool activities. Is that work overwhelming you and hindering your enjoyment? Do you dread the heavy lifting and continuous maintenance your pool requires? We encourage our customers to weigh the pros and cons of hiring a pool maintenance company to do the dirty work for you.

For some of you savvy pool owners, handling your own pool maintenance makes sense. You have the time, kids to help with the workload, or maybe just an interest in pool chemistry. You probably have a “do-it-yourself” mentality or simply do not want to spend the money to hire someone. If any of this sounds like you, you probably don’t need the services of a pool maintenance company.

On the other hand, not everyone has the time and energy to devote to constantly maintaining a swimming pool and/or spa. If this sounds more like you, you may be a great candidate for hiring a pool maintenance company. Our Hassle-Free Pool Care program is perfect for the pool owner who prefers not to have to open and close their pool, measure chemicals, scrub pool walls, skim debris or troubleshoot and maintain pool equipment.

If you can’t decide which route is best, talk to us! Our team will be happy to provide you with a pressure-free, customized pool care program estimate for our services.

We hope you are enjoying and sharing these pool tips with fellow pool owners. Please check back often for more of Tracy’s Tips on our blog.

Tracy Dieselman – Owner

Tracy’s Tips: Do I Need to Remove Snow from My Pool Cover?

We are often asked what to do with the snow that piles up on your pool cover. The answer is simple…NOTHING!

Your pool cover is designed to sit on the water, which supports the weight of the snow and ice.  The only time the snow can cause a problem is if the water in your pool is too low, causing excess strain on the cover. If your pool water is at an optimal level, you do not need to worry about removing snow from your cover.

If you are experiencing a problem with your pool cover, we recommend that you consult a pool care professional. They will come out and take a look at your cover to address the problem and offer a custom solution. Many times you will need to wait until spring to tackle a pool cover issue.

If your pool cover is functioning as it should, the only thing you need to do is cozy up on your couch with some cocoa and daydream of the summer months!

We hope you are enjoying and sharing these pool tips with fellow pool owners. Please check back often for more of
Tracy’s Tips on our blog.

Tracy Dieselman – Owner

New England Swimming Pool Care Calendar

dont-forget-seasons-calendar
Taking care of a pool or spa correctly will increase your enjoyment and protect your investment. Stay on track with our New England Swimming Pool Care Calendar.
January
  • Typically the water in your pool will be frozen. Don’t try to lower the water level. A drop in the water level will allow the ice to drop, possibly pulling out the return plugs or damaging light fixtures.
February
  • Not much can be done at this time. Check the water (ice) level to see if anything has changed. Lower the water to keep the safety cover dry.
March
  • The ice should be melting (hopefully).  Check the water level. Lower the water to keep the safety cover dry.
    • A “wet” cover will trap debris and allow the sun to warm the water and add to the algae growth.
  • When using a “tarp” cover, the leaves on the cover should be scooped out and water removed from the cover. If there are any holes in the cover, be sure that you don’t drain the pool.
April
  • The water is starting to warm up as the days get longer. Test the water and add liquid shock and an algaecide if needed.
  • Keep the cover dry.
May
  • As you get close to the opening date, allow the rain to raise the water to the operating level.
  • If you are planning a later opening (late June or early July) you may want to add more liquid shock.
  • Check the water level periodically so there are no surprises at the opening.
  • Keep the cover as dry as possible.
June
  • Open your pool.
  • Add a metal remover if tap water is added.
  • Perform initial cleaning to remove any debris and balance the water.
  • Check for leaks. Gaskets and o-rings may need to be replaced.
  • Have the pool heater serviced.
  • Make a note of the starting filter pressure.
  • Bring in a water sample after the pool has been circulating for 24 hours.
July
  • Test the water balance at least once a week during the peak of the season.  Additional tests may be needed if water is added.
  • Test and maintain the free chlorine at 1.0-3.0 ppm.
  • Empty the skimmer and pump baskets as needed.
  • Skim the pool surface and vacuum once a week.
  • Bring in a water sample for computer testing.
  • Check the filter pressure and backwash as needed.
August
  • Test the water balance at least once a week during the peak of the season.  Additional tests may be needed if water is added.
  • Test and maintain the free chlorine at 1.0-3.0 ppm.
  • Add a metal remover if tap water is added to prevent staining.
  • Empty skimmer and pump baskets as needed.
  • Skim the pool surface and vacuum once a week.
  • Bring in a water sample for computer testing.
  • Check the filter pressure and backwash as needed.
  • Remove elements or cartridges and clean with Filter Cleaner Degreaser to remove any oils and grease that may have accumulated on your filter.
September
  • Turn off the equipment.
  • Lower the water 12 – 18 inches below the skimmer.
  • Close the pool.
October
  • Maintain the water level at least 3 – 6 inches below the tile line.
  • Keep safety cover dry and remove debris from “tarp” cover.
November
  • Maintain the water level at least 3 – 6 inches below the tile line.
  • Keep safety cover dry and remove debris from tarp cover.
  • Add liquid shock and algaecide.
December
  • Maintain the water level at least 3 – 6 inches below the tile line.
  • Keep safety cover dry and remove debris from “tarp” cover
  • Add liquid shock and algaecide.

 

Tracy’s Tips: Washing Your Polaris Bag for Winter Storage

Photo Credits: Polaris Pool

Machine Wash for Winter Storage

When it is time to put away your Polaris cleaner for the winter, you will want to make sure the filter bag is thoroughly cleaned to prevent rodent damage during the cold months. Hang the full bag on a fence to dry as it’s much easier to empty and clean once it has dried out.

Once your Polaris bag has been emptied, the easiest way to clean it is to throw it right in your washing machine! Wash the filter bag in your washing machine on gentle cycle, with cold water, WITHOUT detergent.

If you prefer not to wash your filter bag in your washing machine, hand-wash the filter bags in a bucket of water to remove all the dust particles from the filter bag. Hang to dry completely before storing it away.

Note: We recommend having an extra filter bag on hand for pool season, giving you the option to take off the full bag and immediately put a clean one on.

Check back often for more of Tracy’s Tips on our blog!

Tracy Dieselman – Owner