Category Archives: Summer Swimming Pool Care

Say Goodbye to Cloudy Pool Water

As pool owners, we all have to deal with cloudy pool water at some point. Determining the cause of the cloudiness is the first step in remedying the situation. Cloudy pool water can be caused by improper levels of chlorine, pH and alkalinity imbalance, broken or clogged filters, algae or debris. Use this guide to help you determine which is the culprit in your cloudy pool.

Why is my pool water cloudy?

1. Are your chemicals properly balanced? (Check your chlorine, pH, alkalinity and calcium hardness.)

  • Did you shock your pool recently? Is there is too much or too little chlorine?
  • Is the pH and alkalinity out of balance?
  • Does the water have high calcium hardness levels?

Solution: Too little chlorine is a leading cause of cloudy pool water. Chlorine is used to sanitize the water and without it, your water isn’t being properly cleaned. Contaminants in the water will build up and cause cloudy water as a result.

Make sure your pH, total alkalinity (TA) and calcium are all in the acceptable range and that the combination of the three aren’t on the high end of the range. If they are, your water is likely out of balance. If the temperature of your water is also on the high side, the imbalance of these chemicals is even more likely the cause of cloudiness. High pH, alkalinity and calcium hardness can lead to cloudiness.

If any of the above are out of the acceptable range, first thoroughly scrub, skim, and brush your pool walls, then vacuum. Once that is complete, work on adjusting the chemicals to get them within the acceptable range again. Re-balance your water by adjusting the pH. Use a pH reducer or increaser to adjust pH levels or add muriatic acid to lower TA. Be aware that even shocking a clean and balanced pool can cause cloudiness temporarily. Shock your pool water to remove harmful bacteria, organic contaminants, and algae. Finally, run your filter and test your water sample.  Use a chlorine stabilizer (cyanuric acid) to protect your chlorine levels.

Chemical                                                          Industry Acceptable

pH (Potential Hydrogen)                         7.2 – 7.8

TA (Total Alkalinity                                      80-120 ppm

Calcium                                                              200-400 ppm

If your pool is 100% balanced and is still cloudy, you should also try a product like Omega Pool Clarifier, available in our store.

2. Is your pool filtration system operating properly?

Poor water circulation and filtration can occur when your
filter doesn’t run long enough, becomes clogged or needs cleaning. Poor circulation can also be caused by skimmer and pump baskets becoming full of debris.

Solution: Turn over your pool water by running your pool filter continuously for at least 12 hours each day. A diatomaceous earth (DE) filter may achieve your desired results after only a few hours because it has the finest level of filtration. A cartridge filter will likely take 2-5 times as long, while sand filters can take multiple days. Add DE powder to your sand filter for more effective filtration. Is your filter clean? Have you back washed or cleaned it recently? If not, we recommend doing so. Most contaminants will be removed if your pool filter and sanitizer are working together. When the leaves are falling because it’s dry, we recommend emptying your baskets daily.

3. Are environmental factors to blame?

  • Leaves, pollen and dust can build up in your filter and hinder the cleaning process. Other environmental factors from
    animal waste to rainwater runoff can cause your pool water to become cloudy and imbalanced. Runoff water brings
    nitrates, phosphates, and other chemicals into your pool throwing the balance out of whack. Algae can also pollute your pool water and can lead to cloudiness, using up your pool’s chlorine rapidly.
  • Are swimmers clouding up your pool water? Sunscreen, hair products, bug spray, and other contaminants can contribute to your water clarity, or lack thereof.
  • The sun alone can deplete your sanitizers. “Its powerful
    ultraviolet rays break apart the sanitizing hypochlorite ions created when you add chlorine to your pool, causing them to evaporate into the air around your pool. This means less sanitizer and more dirt in your water.” – Swim University

Solution: See Solution #2 above. Hint: run your filter! Using an enzyme product such as Natural Chemistry Pool Perfect will also help with contaminants introduced to your water by swimmers. Maintaining proper levels of cyanuric acid, aka stabilizer or conditioner, will keep the sun from using up your chlorine.

The absolute best way to rid your pool of cloudy water is to prevent it from becoming cloudy in the first place. We recommend working with our team of professionals to create a pool maintenance schedule that you can implement or signing up for our Hassle Free Pool Care program. Contact us to learn more!

Should I Change My Pool Filter Sand?

Photo credits: Swim University

Customers often ask us if it is recommended or necessary to change their pool filter sand. The answer isn’t quite as simple as a yes or no. Even pool industry professionals are on the fence on the topic.

Let’s explore both sides of the debate.

Why Some Say NO to Changing Your Pool Filter Sand

The most common reason professionals say there is no need to change your filter sand is because sand lasts forever and need not be replaced. For maintenance, they suggest cleaning it about once a year with a professional sand cleaner.

Why Others Say YES to Changing Your Pool Filter Sand

The professionals that recommend changing your pool filter sand argue that not only should you replace your sand every 3-5 years, but you should also clean it in the interim. The argument for changing the sand is based on the belief that sand does eventually wear down and become smooth. When this happens, the sand cannot trap debris as well and it is time to replace it.

To Change or Not to Change

Filter manufacturers generally recommend changing your pool filter sand every few years. Since these companies manufacture the filters, they have nothing to gain from selling you new sand. We would advise following the manufacturer’s recommendations.

While the final decision is yours, we would advocate for changing your pool filter sand every 3-5 years.

If you do decide to change your pool filter sand, our friends at Swim University will show you how in this easy to follow video.

Tracy’s Tips: DIY Pool Toy Organizer

Image Courtesy of: Juggling Act Mama

DIY Pool Organization Pallets

Does your collection of floats and toys seem to grow more and more each pool season? Keep your floats, towels, noodles, goggles and more neat and tidy with this fun DIY pool toy organizer project.

Use a recycled natural wood pallet (stay away from ones that may have been chemically treated) and paint it to match your patio decor or whatever fun design style you like! Get the kids involved and add unique hooks for each family member to hang their towels when they aren’t using them. The design options are endless!

For step by step instructions, check out this helpful video from HGTV.

Need a pallet for your project? Stop by or call our Retail Store, we usually have some available.

Check back often for more of Tracy’s Tips on our blog!

Tracy Dieselman – Owner

Mosquito-Free Poolscapes

Nothing ruins a pool day like a swarm of relentless mosquitoes ready to make you the main course at the BBQ. Don’t let pesky, disease-carrying pests ruin your time. Consider these ideas to make your pool area less appealing to mosquitoes.

Integrate Your Approach

When it comes to mosquito management, you’ll want to use a combination of these recommendations for best results.

1. Remove standing water and fill in holes in the yard. Stagnant water can quickly become a breeding ground for mosquitoes. Be sure to inspect your yard after rain for these areas and fill them in to remove the problem.

2. Utilize a solar cover. Solar covers have many benefits, one of which is to keep insects out of your pool. As an added bonus, you will keep your pool water from evaporating as quickly, while using the sun to help heat your pool.

3. Invite mosquito predators into the yard. Bats, dragonflies, birds, tadpoles and fish are just a few of the critters that enjoy feasting on adult mosquitoes and larvae. If you make your pool area inviting for these animals, you will have some help managing the mosquito population.

Image result for bat house

4. Keep up with maintenance. Maintain a clean and balanced pool to keep mosquitoes at bay. A dirty pool will have the opposite effect.

5. Maintain the landscaping. Remove rotten leaves and debris that also hold water. Be sure to check under things (like your deck) for rotting organic material that are sure to become home to mosquito larvae. Some plants are said to have insect repelling properties and naturally repel mosquitoes. Try planting lemon thyme, catnip, lemon balm, lavender, basil, garlic, rosemary and marigolds as deterrents.

Related image

6. Repair cracks in the septic. “If there’s a way for mosquitoes to get into your septic tank to lay their eggs, they will find it. Search for any place they could get in, such as uncovered ventilation pipes, cracks in the tank walls, and gaps in the septic tank cover.Cover ventilation pipes with screen mesh tight enough to prevent insects from flying through. Use cement to repair your tank walls. Replace tank covers that don’t have a snug fit. If you have an abandoned septic tank on your property, consider filling it in to keep it from turning into a big mosquito condo unit.” – Swim University

7. Try to trap them. Portable mosquito traps work by attracting insects through light and CO2, mimicking human movement and capturing them. Many people prefer this method to insecticides that utilize chemicals to kill off mosquito populations.

8. Consider a mosquito repellent device like the Thermacell Patio Shield Mosquito Repellent Lantern. “The Thermacell Patio Shield Mosquito Repellent Lantern effectively repels mosquitoes by creating a 15 feet zone of protection. It’s small and compact design along with ambient light feature makes it perfect for any deck or patio. Use your Patio Shield repellent for entertaining guests, gardening, camping, around the backyard and more.”  Thermacell

Pick yours up in our Retail Store while supplies last!

9. Mist and spray them away. Home mist machines, professional yard spraying services, and do-it-yourself insecticide application can all help relieve mosquito problems. These should all be used carefully, especially with children and pets in the yard. The EPA cautions, “No pesticide should be regarded as 100% risk free.”

10. Build a bug-free enclosure. Installing an enclosure around your pool brings your outdoor pool indoors with regards to keeping bugs out.  Enclosures are often used in tropical climates where the mosquito populations thrive in the mild, wet weather. Adding mesh curtains around outdoor dining areas for instance, will make your yard more pleasant for gathering.

11. Encourage a strong breeze. Get creative with your approach and try installing outdoor fans. The wind will keep mosquitoes away from the breezy area because they are weak flyers.

Related image

We hope you’ll find these tricks helpful for mosquito management in your yard. Do you have any mosquito fighting tips that we left off the list? Leave your suggestion in the comments!

How to Restore Your Pool Water After a Rainstorm

In New England, you never know what the weather will be. A sunny day can quickly turn into a rainy afternoon, with thunderstorms a common occurrence during the spring and summer months. You’re best bet is to prepare for everything, whatever the weather.

If you experience a rainstorm, there are a few steps you will want to take to keep your pool clean, balanced and filled with the optimal amount of water.

1. Check Your Chemicals

Rainwater in the United States is considered acid rain, which means it can adversely affect the pH, alkalinity, total dissolved solids, and calcium hardness levels in your pool water. Rainwater can also dilute your sanitizer. It is necessary to control any contaminants, so make sure to check the sanitizer levels. If you have a salt water pool, salt will also be diluted by rain. Runoff water from your yard or pool deck, debris, and even lightning can cause your pool water to become unbalanced.

2. Start the Cleanup

Start the cleanup process by cleaning out your skimmer and pump baskets. This will make the job easier for the next steps; turning on your pump and filter and skimming the surface of your pool water. Run your pump and filter while skimming to remove both large debris and smaller particles. Windy storms can often blow leaves, sticks and other brush into your pool that will need to be removed. Brush the walls, steps and ladders in your pool and vacuum to clean up whatever you may have missed with the skimmer and filter. If you have an automatic/robotic pool cleaner, you may want to use that unless there is significant debris. If there is, you may be better off with a manual pool vacuum.

3. Perform the Balancing Act

With a clean pool, you are ready to re-balance the chemicals in your pool water. We recommend that you test your pool water after any significant rainstorm. A light rainstorm should not greatly affect your pool chemical levels, but it never hurts to check to be certain they are in the proper range. Your chlorine and sanitizer levels should also be monitored to avoid contaminants that could lead to cloudiness or algae growth.

Stop by our Retail Store for a free professional water test and for all your pool chemical supplies!

4. Administer Shock

It may not be crucial to shock your pool after a rainstorm, but it can be beneficial to remove any left over contaminants. Drain your pool water to the correct levels and check your chemicals before administering a shock treatment. Shock your pool in the evening after a rainstorm, once you have performed the preceding steps.

Follow these steps and you’ll be back to swimming in your pool in no time!

How To Identify and Remove Pool Stains by Swim University

“A dirty pool is bad enough. But a stained pool? Yuck! How is that even possible? You’re good about cleaning your pool, balancing the water, and keeping the sanitizer level steady. You shouldn’t be seeing any stains on your pool walls or floor.

If only that were the case. The truth is, you can be super vigilant about maintenance, and your pool can still end up with stains. The good news is, all you need is a good pool stain remover. The better news is, you can take steps to prevent future pool stains. The key is knowing what caused the stains in the first place.” – Swim University

What Causes Pool Stains?

Before you can choose and apply the correct pool stain remover, you need to determine what stained your pool. The most common pool stains generally fall into two categories:

  • Organic: Leaves, berries, and other organic debris can leave stains if they’re allowed to settle and left too long on your pool’s surfaces.
  • Metal: Several types of metal can accidentally be introduced into your pool. Maybe your primary water source is a well, or you have corroded copper pipes in your water system. Rusted metal accessories, parts, and equipment can also cause stains.

Once you determine what type of stain you have, you can decide which type of pool stain remover to use. The best way to figure that out is by the stain’s color.” – Swim University

Continue reading How to Identify and Remove Pool Stains by at Swim University.

Product SpotlightNatural Chemistry’s Stainfree Extra Strength™ & Metalfree™

“Natural Chemistry’s Stainfree Extra Strength is a premium stain fighter that contains 100% ascorbic acid. It quickly removes metal staining without adding phosphates to your water. It is ideal for treating staining on all pool surfaces. Use with Natural Chemistry’s Metalfree™ and you have the ultimate 1-2 combination for stain fighting!” Visit our Retail Store to pick yours up today!

Tracy’s Tips: Get the Most Out of Your Skimmer

Pantyhose for the Fine Details

Did you know that both your skimmer basket and skimmer net can can be improved to be more effective cleaners?

Remove fine debris in your pool by wrapping a pair of old (or new) pantyhose around your skimmer basket. This quick trick will remove smaller particles than with the skimmer basket alone, and your filter will not have to work as hard. You can also use old pantyhose over your skimmer net for the same effect.

So the next time you get a run in your stockings, repurpose them into an easy pool cleaning tool. Replace the pantyhose when they are full of debris and rinse out the skimmer basket before putting on a new pair.

Check back often for more of Tracy’s Tips on our blog!

Tracy Dieselman – Owner

Tracy’s Tips: How Often Should a Pool Filter Run?

The long and short of it is this, you theoretically could run your pool/filter pump 24/7, the entire time your pool is open. However, doing so would not only be costly and use a great deal of energy, it would also be completely unnecessary.

We recommend that you run your pool filter for at least 12 hours per day, allowing all of your pool water to be run through the filter at least once each day. That being said, the more you run the filter, the cleaner your pool will be.

You can cut down on energy costs by running your pool filter at night or very early in the morning when energy rates are usually lower. Keep in mind, you need to run your filter when adding chemicals and while cleaning, which may be more difficult to do in the dark. If you’re swimming during the day and find the pool surface filling with debris, turn on the system so the skimmers can do their job.

Are you finding this information helpful? Share it with friends! Check back often for more of Tracy’s Tips on our blog.

Tracy Dieselman – Owner

Avoiding Pool Water Heat Loss & Evaporation

When it comes to summer pool maintenance, maintaining your water level and temperature can take a little effort. Evaporation is inevitable in the warm months. Your pool will lose water, as well as precious heat, which can be costly.

Proactively combat both problems by using a solar pool cover.  Solar pool covers use the sun’s energy to heat your pool with the added bonus of reducing water evaporation by about 95%. Keep the water in your pool and keep your money in your pocket with this smart investment.

Photo credits: Swim University

When you lose pool water due to splashing, swimming, and evaporation, you will have to replace that water. This process requires more energy to heat the water back up. When you lose water, you also lose costly chemicals in that water. Use a solar cover to heat the water from the sun’s rays, while keeping the chemicals in the pool and debris out.

Bubble Solar Covers

Bubble Solar Covers are very popular and can be cut to fit the shape and size of your pool. Some people choose to use one big solar cover, while others choose to cut their cover into strips to make it easier to take on and off frequently. Use the solar cover whenever you are not using your pool, especially when the sun’s out.

Solar Cover Reels

Solar cover reels are a great option for pool owners looking to save time and effort. They can be used on both above and in-ground pools and are generally installed at one end of the pool, though portable options are available. The solar cover reel will allow you to easily roll up the cover neatly when not in use, and pull to re-cover the pool when you are done. Always remove the solar cover completely before allowing any swimmers in the pool for everyone’s safety.

Liquid Solar Covers

Liquid solar covers are an alternative to traditional bubble solar covers. In simple terms, liquid solar covers are a thin layer of alcohol that sits on top of the water of your pool, reducing water evaporation and heat loss. When the liquid solar cover is poured into your pool, the solution will disperse across the
surface water and bind together to form the blanket.

Liquid solar covers are safe to use, biodegradable, and approved by both the FDA and EPA. The amount of solution needed will depend on the size of your pool. On average, using the liquid solar cover will cost you about $10-$30 monthly. You will want to add liquid solar cover to your pool monthly and follow the directions on the package. Weather conditions and pool use can affect how much liquid solar cover you should use.

Learn more about liquid solar covers from our friends at Swim University, and check out the videos below to see how it works.

Stop by our Retail Store to pick up Natural Chemistry COVERfree or order a HeatSavr system that automatically adds the liquid to the pool. We also can special order bubble solar covers for your pool – come in and talk to us!

Do liquid solar blankets really work?