New England Swimming Pool Care Calendar

Taking care of a pool or spa correctly will increase your enjoyment and protect your investment. Stay on track with our New England Swimming Pool Care Calendar.

January
  • Typically the water in your pool will be frozen. Don’t try to lower the water level. A drop in the water level will allow the ice to drop, possibly pulling out the return plugs or damaging light fixtures.
February
  • Not much can be done at this time. Check the water (ice) level to see if anything has changed.
March
  • The ice should be melting (hopefully).  Check the water level. Lower the water to keep the safety cover dry.
    • A “wet” cover will trap debris and allow the sun to warm the water and add to the algae growth.
  • When using a “tarp” cover, the leaves on the cover should be scooped out and water removed from the cover. Make your life easier by purchasing a leaf net that will catch the leaves on your cover for you. If there are any holes in the cover, be sure that you don’t drain the pool.

April
  • The water is starting to warm up as the days get longer. Test the water and add liquid shock and an algaecide if needed.
  • Keep the cover dry.
May
  • As you get close to the opening date, allow the rain to raise the water to the operating level.
  • If you are planning a later opening (late June or early July) you may want to add more liquid shock.
  • Check the water level periodically so there are no surprises at the opening.
  • Keep the cover as dry as possible.

June
  • Open your pool.
  • Add a metal remover if tap water is added.
  • Perform initial cleaning to remove any debris and balance the water.
  • Check for leaks. Gaskets and o-rings may need to be replaced.
  • Have the pool heater serviced.
  • Make a note of the starting filter pressure.
  • Bring in a water sample after the pool has been circulating for 24 hours.
July
  • Test the water balance at least once a week during the peak of the season.  Additional tests may be needed if water is added.
  • Test and maintain the free chlorine at 1.0-3.0 ppm.
  • Empty the skimmer and pump baskets as needed.
  • Skim the pool surface and vacuum once a week.
  • Bring in a water sample for computer testing.
  • Check the filter pressure and backwash as needed.
August
  • Test the water balance at least once a week during the peak of the season.  Additional tests may be needed if water is added.
  • Test and maintain the free chlorine at 1.0-3.0 ppm.
  • Add a metal remover if tap water is added to prevent staining.
  • Empty skimmer and pump baskets as needed.
  • Skim the pool surface and vacuum once a week.
  • Bring in a water sample for computer testing.
  • Check the filter pressure and backwash as needed.
  • Remove elements or cartridges and clean with Filter Cleaner Degreaser to remove any oils and grease that may have accumulated on your filter.

September
  • Turn off the equipment.
  • Lower the water 12 – 18 inches below the skimmer.
  • Close the pool.
October
  • Maintain the water level at least 3 – 6 inches below the tile line.
  • Keep safety cover dry and remove debris from “tarp” cover.
November
  • Maintain the water level at least 3 – 6 inches below the tile line.
  • Keep safety cover dry and remove debris from tarp cover.
  • Add liquid shock and algaecide.
December
  • Maintain the water level at least 3 – 6 inches below the tile line.
  • Keep safety cover dry and remove debris from “tarp” cover
  • Add liquid shock and algaecide.

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s